Measurement Accuracy
High-accuracy static scanning in about 10 seconds; automatic truck-bed 3D dimensioning
Pain Points
Are You Facing These Challenges?
These issues raise operating costs, delay decisions, and create safety and settlement risks.
Safety Risk
Loading anomalies (off-center load) are hard to detect quickly
Accuracy
Weighbridges provide weight only, not volume; Manual measurement is time-consuming and error-prone; Separate entry/exit lanes make it difficult to link the same vehicle's empty and loaded data
Efficiency
Load data must be manually entered into management systems
How It Works
Four Steps to Automated Measurement
Fully automated from data capture to output — no manual intervention.
01
Site survey
Engineers assess the measurement station environment and determine the installation plan
02
Installation
3D laser scanner, control unit, power cabinet, and identification modules are mounted above the station
03
Calibration
System calibration and empty-state baseline collection, integrated with PLC and the management platform
04
Handover & training
System acceptance, then operator and maintenance training
Why Neuvition
Core Capabilities
Integration
integration with PLC control systems
Multi-Scenario
rotating 3D scanner with full coverage; multi-station deployment with entry/exit comparison; supports trucks longer than 10m
Industries
Industries We Serve
Explore customer cases by industry
Mining
Monthly stockpile audits & volumetric freight settlement
Cement
Clinker & raw stockyard inventory, load metering
Power
Coal inventory management & feed metering
Port
Bulk yard handover & loading metering
Logistics
Fleet load monitoring & digital waybills
Grain
Grain depot supervision & load volume
Customer Cases
Related Customer Cases
LiDAR-based Automatic Localization and Navigation System for Spraying Vehicles
China
This project applies to an automated spray coating production line, solving the automatic positioning of spray carts after they enter a designated station. Before coating begins, the system uses LiDAR to detect the relative position between the spray cart and…
Intelligent Clinker Loading Retrofit at a Cement Plant Case
Hangzhou, China
Clinker outbound loading process The customer loads clinker onto trucks via belt conveyors. The project uses a LiDAR-based truck volume measurement system to automatically measure the truck bucket space, combined with vehicle recognition and discharge control, achieving precise, managed clinker…
±2%
Measurement accuracy
1 staff
Fixed-staff headcount reduced
FAQ
Frequently Asked Questions
Must the vehicle stop?
Yes — the truck stops under the station for about 10 seconds per scan.
How is the system installed?
A 3D laser scanner plus power cabinet are installed above the station and calibrated.
Can it integrate with PLC and management systems?
Direct PLC via communication protocols plus API for upper systems.
Do dust and rain affect it?
Light rain or snow is fine; heavy dust or water vapor reduces accuracy.
What is the accuracy?
±3% (12–25 m³), ±2% (>25 m³).
How long does a scan take?
About 10 seconds in standard mode, with results in ~30s; actual time depends on truck position and tilt.
What accuracy is achieved?
±3% (12–25 m³), ±2% (>25 m³).